Low Price 6X4 Driving Type Sludge Tipper Farm SINOTRUCK HOWO NX Dumper Truck

• Customization: Available
• After-sales Service: Spare parts service
• Warranty: 1 year or 100,000km
• Model NO.: ZZ3257V384JB1
• Transmission Type: Manual
• Power: Diesel
• Load Capacity: 21-30t
• Emission Standard: Euro 2
• Drive Wheel: 6×4
• Engine Capacity: ＞8L
• Seats: ≤5
• Horsepower: 351-450hp
• Tire Certification: ECE, GCC, ISO, DOT
• Tire Design: Radial
• Dumping Type: Front Lifting Style
• Condition: New
• Product Name: Dump Truck
• Engine Model: WP12.400E201, 400HP, EURO II
• Engine Displacement: 11.596L
• Engine Maximum Output: 400HP (294Kw) At 2100Rpm
• Engine Maximum Torque: 2000Nm
• Gearbox Model: 10F/2R Manual Gearbox, With PTO
• Cooling System Medium: Water With Twin Cylinder Air Compressor
• Cooling System Radiator: Heavy Duty Type
• Cooling System Cooling Fan: VISCO Static Fan Tropical Type
• Cooling System Thermostat: Opening At 70-80 Celsius
• Cooling System Warning Device: Audible & Visual
• Steering Type: Hydraulic Steering With Power Assistance
• Tyre Model: 12.00R20
• Tyre No. Of Tyres: 10+1 Spare
• Fuel Tank: 400L With Locking Fuel Cap, With Anti-Theft System
• Transport Package: Standard Packaging or Customized
• Specification: Standard specifications or customized
• Trademark: SINOTRUCK
• Origin: Shandong, China
• HS Code: 8704230090
• Production Capacity: 1000 Units Per Month
• Package Size: 850.00cm * 258.00cm * 345.00cm
• Package Gross Weight: 12000.000kg

Product Description

Product Description

SINOTRUCK HOWO NX Dumper Truck Product Introduction

SINOTRUCK HOWO NX dumper truck cab is spacious and the driver's seat is ergonomically designed to provide good support and comfort, protect the driver's waist, reduce driving fatigue, and suitable for long time driving. The front windshield is large and has a wide visibility range, and the design of the rearview mirror is optimized to reduce the blind spot and improve driving safety. In addition, the three-stage foot pedal is used for getting in and out of the vehicle, which can improve the safety and reliability of operators getting in and out of the vehicle.
 

SINOTRUCK HOWO NX Dumper Truck Parameters

DUMP TRUCK SPECIFICATION
Engine
Model	WP12.400E201
Horsepower	400HP
Emission	Euro 2
Other	4-stroke direct injection diesel engine
Cabin
Model	H77L, with one bed, A/C
Other	Full steel skeleton structure, covered with double layer steel plate; can be tipped forwardly
Gearbox
Model	10JSD180, 10 forward and 2 reverse gear
Max.Input Torque	1800NM
Tire
Model	12.00R20, 10+1 pcs
Brand	TRIANGLE
Fuel Tank
Model	400L
Material	Aluminum alloy
Drive Axle
Model	13 tons double reduction axles
Load Capacity	2x13000kg
Brake Type	Drum brake
Cargo Body
Size	5600x2300x1500mm
Material	manganese steel

SINOTRUCK HOWO NX Dumper Truck Cargo Box

SINOTRUK HOWO NX tipping truck cargo box is a rectangular bucket, suitable for transporting sand, gravel, aggregate and other materials, with a large loading capacity of up to 30 tons. There is an extended ladder installed in front of the cargo box, which is convenient for staff to operate and improves safety and reliability. The cargo box is made of Q355 manganese plate, which is of high strength and can withstand large pressure without deformation or breakage, and has a long service life.

Dump Truck Detail

Engine Detail

-1. Diesel: 4-stroke direct injection diesel engine;
-2. Model: WP12.400E201, Euro II emission standard; 
6-cylinder in-line with water cooling, turbo-charging 
and intercooling, 4 strokes; 
-3. Maximum Output: 400HP (294Kw) at 2100rpm; 
-4. Maximum Torque: 2000Nm at 1200-1500rpm; 
-5. Displacement: 11.596L; 
-6. Bore/Stroke: 126x155mm;

Cabin Detail

 -1. German electrical control system;
 -2. H77L model cab, with one sleeper, A/C, right hand
 -3. Up and down, left and right sides adjustable
 steering wheel;
 -4. European new type heater as a whole;
 -5. Four full floating suspension + suspension device;
 -6. Double locking structure belts;
 -7. MP3 radio
 -8. Bumper: steel material
 

Gearbox Detail

-1. Model: 10JSD180+QH50. 10F/2R manual gearbox
-2. Max.Input Torque: 1800NM
-3. Oil Capacity: 14.5L
-4. With QH50 power take off (PTO)
-5. Ratio: 14.86, 11.02, 8.07, 6.02, 4.46, 3.33, 2.47, 1.81, 1.35, 1, 14.24 (R1), 3.19 (R2)

Drive Axle Detail

 -1. Model: HW19710+HW50, 10F/2R Manual Gearbox
 -2. Max.Input Torque: 1900NM
 -3. Optional: HW19710T/ HW19712 ect
 -4. With power take off (PTO)
 -5. Ratio: 14.284, 10.623, 7.871, 5.876, 4.375, 3.265, 
 2.428, 1.799, 1.343, 1.00, 13.913 (R1), 3.18 (R2)

Tire Detail

-1. Model: 12.00R20, 10+1 pcs. Radial model
-2. Rim: 8.5, 10 hole-steel
-3. Pattern: TR668
-4. Loading Capacity: 3750kg (one pcs); 3450kg (two pcs)
-5. kPa: 830kPa (one pcs); 830kPa (two pcs)
-6. Ply Rating: 18PR

 

Manufacturing Technology

 

Automatic Welding Technology:

A good welding technique not only makes the product look beautiful, but also ensures the welding quality and improves the service life of the product. For this, TRUCKMAN uses automatic welding technology with robots. Robot automatic welding technology has high welding efficiency, high and stable welding quality, beautiful weld seam and other characteristics, the following is the cargo box welding show for your reference.

Electrostatic Powder Coating Tech:

This process uses the electrostatic field at that time, the powder will be adsorbed on the surface layer of the workpiece in a balanced manner, forming a coating structure; the powder coating structure and then through the drying oven high temperature baking leveling and curing, into the final coating with different effects. The coating has good corrosion resistance, high efficiency, uniform spraying and bright appearance.

 

Shipping And Rust Prevention

SINOTRUCK HOWO NX Dumper Truck Shipping

Bulk vessels are the most commonly used mode of transportation when transporting trucks, and there are many of them available every month, and they are relatively inexpensive. There are two ways of placing the bulk vessels: on deck and inside the cabin. If they are placed on deck, it is cheap, but they are easily corroded and rusted by the waves during transportation, which affects the service life of the trucks. Therefore, we will ask the shipping company to place the truck inside the cabin, which can better protect the truck to avoid the rust problem, only the freight cost is slightly higher than placing it on the deck.
 

SINOTRUCK HOWO NX Dumper Truck Rust Prevention

Before shipment, we will clean the truck to remove the impurities and dirt on the surface. After the surface of the truck is free of moisture, we will spray anti-rust wax on the surface. This anti-rust wax can form a layer of protective film, which can effectively isolate the oxygen in the air and avoid the erosion of corrosive factors such as air, moisture, salt spray, etc., and then the truck will be transported to the port of shipment.

Customer Visits And Feedback

Customer Visits

The customers came to our company to visit the factory and production line, we introduced the production process and related details to them, the customers raised questions and concerns during the visit, our business answered them in detail, and the customers expressed their confidence in our cooperation. Subsequently, we made relevant plans according to the customer's needs and signed a cooperation contract to reach a friendly cooperation.
 

Customer Feedback

Ghanaian and Zambian customers purchased tipper and respectively from our company. Our dump trucks are produced with high strength steel, stable and reliable quality, long service life, and anti-corrosion treatment such as spraying wax after completion, which effectively avoids the rust problem. The customers are very satisfied after receiving the vehicles and have already put them into use.
 

 

Certifications

We have CNCA, CO, CE and other qualification certificates, which meet the different requirements for semi-trailers in many countries around the world, and can be exported to different countries and regions smoothly to meet the local standards for safety, environmental protection, quality and so on. They are manufactured with strict quality testing for high safety, and also meet international emission standards, which helps to protect the environment.

 

Ocean Bill Of Lading

This is the ocean bill of lading for Sierra Leone customer and Uganda customer who purchased tractor truck, semi-trailer and dump truck from our company, we recommended trucks and semi-trailers that are more suitable for local use according to customer's needs. After the production was completed, we shipped the products in time and the customer received the products soon. Now, these customer has put the trucks and semi-trailers into use and is very satisfied with our products. 

Company And Personal Profile

Company Profile

JINAN TRUCKMAN AUTOMOBILE Co., Ltd. Was established in year 2010, that mainly focus on SINOTRUK, SHACMAN, BEIBEN, FOTON all series new trucks, and all China brand new construction machinery, CIMC and TRUCKMAN semi-trailers and full trailers export business. The goods can meet all certificate and different work demand, such as BV, SGS, CO, CIQ, GCC, SONCAP, FORM E, ADR certificate etc, also with reasonable price. With years development, our business extended to more than 60 more countries and regions in the world like Nigeria, Angola, Ghana, Tanzania, Kenya, Djibouti, Ethiopia, Mali, Congo, Philippines, Vietnam, Malaysia, Laos, Myanmar even Latin America countries like Chile, Peru...We take"Quality, Honesty, Responsibility" as our enterprise core value to make you best cooperation experience. TRUCKMAN people are brave in pioneering and innovative management, and practice their corporate mission with professional services, and are committed to becoming a world-class enterprise with international characteristics.

Personal Profile

This is Eileen from TRUCKMAN, China. As a professional foreign trade salesman, I know a lot about the truck industry. I am skillful in mastering various truck types and their application scenarios, understand the related truck technical parameters, and can recommend product configurations that are more suitable for local use according to customers' needs and in combination with the countries and regions where the customers are located.
I am familiar with the South American Market and have exported various types of trucks to the local market many times. In the process of communication with customers, I understand and respect their customs and business habits, always customer-centered, patiently listen to customer comments and feedback, solve problems in a timely manner, and provide them with quality service and support. In the subsequent order arrangement, I also pay great attention to details to ensure that the contract, order and transportation arrangements are accurate. As a result, I have received a consistent degree of recognition from local customers.